Sniping guide

This will be short and to the point. All the true statistics of all snipers and some advice on each will be given.

Key
OHK: One Shot Kill
1.5x: Multiplier, will OHK without SP, or with SP and Silencer here.
1.1x: Multiplier, will OHK here with SP and no silencer.
1.0x: Multiplier, will not OHK.
RPM: Rounds per minute

Notes:
-All snipers do 70 damage, silencers lower this to 50 at all ranges. There is no change in sway
-Damage multipliers will be listed as follows: Head, Neck, Chest, Body, Limbs
-Silencers without Stopping Power take away any chance of an OHK.
-Ghillie suits for Urban, Desert, and Arctic can be achieved by getting multiple OHK’s.


Intervention M200 (bolt-action)

Damage Multipliers: 1.5, 1.5, 1.5, 1.1, 1.0
RPM: 67 RPM

Penetration: High
Ammo Cap: 5+15
Recoil: Medium, scope moves while cycling the bolt
Stopping Power is recommended, OHK’s are important. Inferior to the Barrett, but its bolt-action, and, therefore, awesome.

Barrett .50
Damage Multipliers: 1.5, 1.5, 1.5, 1.1, 1.0
RPM: 600RPM

Penetration: Very High
Ammo Cap: 10+20
Recoil: Very High
Stopping Power can be done without, but helpful. Statistically the best sniper.

Walther WA2000
Damage Multipliers: 1.5, 1.5, 1.5, 1.0, 10
RPM: 444RPM

Penetration: Medium
Ammo Cap: 6+18
Recoil: Low
Stopping Power is useless, unless using a silencer, it has no 1.1 multipliers.

M21 Enhanced Battle Rifle
Damage Multipliers: 1.5, 1.1, 1.1, 1.0, 1.0
RPM: 1200RPM

Penetration: Medium
Ammo Cap: 10+20
Recoil: Very Low
Stopping Power is recommended, unless you want to spam or only do headshots.

Advertisements
  1. No comments yet.
  1. January 6, 2010 at 15:22

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s